Acrylic prints

Prints bonded to the back of clear acrylic, for a deep, glass-like finish on photographs, retail graphics and lightbox displays.

Shop window at night showing a large backlit image of a private jet and a woman in red on the telephone
One of six windows for Polo Ralph Lauren in New Bond Street, using Translites face-mounted onto Perspex.

Face-mounting puts a sheet of clear acrylic (often known by the brand name Perspex) in front of your print. The print is bonded to the back of the acrylic, so you look at the image through it. Colours look deeper, blacks look richer and the surface has a clean, glossy finish that is easy to wipe.

Caring for an acrylic print

Acrylic is easy to clean but scratches more easily than glass. Dust it with a soft, clean cloth and, if needed, wipe it with a little water. Avoid paper towels and household glass sprays with ammonia, which can mark the surface over time. Hang the piece away from radiators and direct heat.

Who chooses acrylic

Acrylic face-mounting is popular with photographers and galleries, with hotels, restaurants and offices that want artwork without a frame, and with retailers. For Polo Ralph Lauren's flagship store in New Bond Street we face-mounted Translites onto Perspex for six windows; the images were lit from behind, so the acrylic gave a clean, glowing surface from the street.

Acrylic, glass or a frame?

  • Acrylic face-mount: no frame, no gap between print and glazing, a modern look. Lighter than glass and less likely to shatter.
  • Glass: we can also print and mount onto glass for rigid work where glass is specified.
  • Framed print: a more traditional finish. See our photographic prints and fine art prints.

Front-lit or backlit

An acrylic print can be hung on a wall and lit normally, or it can be built into a lightbox. For lit displays the print is made on translucent backlit film rather than paper, and then face-mounted to the acrylic. If you are planning an illuminated piece, see backlit and lightbox prints, and tell us so we choose the right film.

How the job runs

  1. You send the image and tell us the size and where it will hang or be lit.
  2. We check the file and print it, on photographic media for a wall piece or backlit film for a lightbox.
  3. The print is face-mounted to the acrylic in our workshop.
  4. We add the fixings the wall or display needs, and can install it for you.

Preparing your image

Acrylic magnifies quality, good and bad. A sharp, well-exposed photograph looks superb; a soft or noisy one shows its faults. So:

  • Send the highest-resolution file you have, at or close to the finished size.
  • Check dark areas. Acrylic deepens shadows, so shadow detail that is barely visible on screen may disappear. Ask for a test print if the image is critical.
  • If your original is a negative, slide or print, we can drum scan it first.
  • Gloss reflects. Think about where the piece will hang in relation to windows and lights.

Order an acrylic print

Tell us the size, how many and where it will hang. Request a quote or send your image file and we will check it before printing.

Questions

Is acrylic the same as Perspex?

Perspex is a brand name for acrylic sheet. People use the two terms interchangeably.

Can an acrylic print go in a bathroom or kitchen?

The acrylic face is wipeable, but talk to us about the location so we can advise on the backing and fixings.

Will it reflect light?

Yes, acrylic has a gloss surface. Consider where windows and lamps are in relation to the wall.

Can you make illuminated acrylic panels?

Yes. We face-mount backlit film to acrylic for lightboxes and windows, as we did for Polo Ralph Lauren.

Tell us what you need printed

Give us the size, the material and the date you need it. We will check your files and send a quote.

0203 026 0636
London80 Willow Walk, Unit 1, London SE1 5SY
0203 026 0636   sales@superchrome.com