Guides ·

A print timeline for your next exhibition

A step-by-step plan for exhibition graphics, from the organiser's manual and stand measurements through artwork, proofs and production to delivery and build-up.

A print timeline for your next exhibition

Exhibition print goes wrong in predictable ways: artwork finished late, a panel the wrong size because the stand changed, graphics arriving the day after build-up. Almost all of it comes down to timing. The answer is to plan backwards from the day the doors open and give each stage the time it needs.

We cannot give you fixed lead times here, because they depend on what you are printing, how much of it, and what else is happening that week. Tell us your show date early and we will confirm timings for your job. What follows is the sequence, so nothing gets missed.

Step 1: Read the exhibitor manual

Every show has its own rules, set out by the organiser or venue. Before anything is designed, find out:

  • Your stand size, type (shell scheme or space only) and height limit
  • What the shell scheme walls are made of and how graphics can be fixed to them
  • Fire-safety requirements for materials
  • Build-up and breakdown times, and delivery arrangements for the venue
  • Any deadlines for submitting stand plans

Every venue is different, so share the relevant pages with us and we will work to them.

Step 2: Decide what you need

List every printed item: back wall, side walls, fascia, pop-up display, roller banners, counter wraps, posters, floor graphics, hanging banners. Check what you already own. If your frames and stands are in good condition, you may only need new graphics for them.

This is also the time to decide on materials. Fabric graphics pack small and look good under lights; rigid panels give a crisp, solid finish; backlit graphics stand out in a dim hall. If you would like help, our exhibition graphics team can advise on the whole stand.

Step 3: Confirm sizes and templates

Measure the space, or get exact sizes from the stand builder or organiser, and ask us for templates for any hardware. Pop-ups, roller banners and modular systems all have specific graphic sizes and hidden areas. Do not design until sizes are fixed; resizing finished artwork is slow and easily goes wrong.

Step 4: Write and design

Copy is usually what holds up exhibition artwork. Agree the messages, images and logos early, and get any approvals from colleagues or partners lined up. Design with the viewing distance in mind: headlines and logos high up where they show above crowds, details at eye level. Our guide to setting up artwork covers bleed, safe areas and file formats.

Overhead view of printed exhibition cubes showing a desert sunset and an underwater scene, surrounded by visitors
Large stand graphics have to work from a distance and close up.

Step 5: Send artwork and check proofs

Send files through our upload page. We check them before printing and will flag problems such as low-resolution images or missing bleed. Build in time to fix issues and to approve proofs. If brand colour is critical, ask for a test print on the actual material.

Step 6: Production and finishing

Printing is only part of production. Mounting, laminating, cutting, sewing fabric edges, fitting graphics to stands and packing all take time, and some steps, such as letting prints dry before laminating, cannot be rushed. This is why late artwork affects the date more than people expect.

Step 7: Delivery or collection

Agree whether graphics go to your office, to the stand builder, or straight to the venue, and check the venue’s delivery rules. Leave a margin before build-up in case of delays in transit.

Step 8: Build-up

Bring a small kit: spare Velcro, double-sided tape, scissors, a cloth for marks, cable ties. Check every graphic as it goes up, and photograph the finished stand so you have a record for next time. If you need us to install, tell us when you order so we can plan it.

Step 9: After the show

Pack graphics carefully: roll banners and fabric rather than folding where possible, and keep rigid panels flat and protected. Note what worked and what you would change. We keep your files, so next year’s update can start from this year’s artwork.

Running late?

If the timeline is already tight, see getting print ready for a trade show at short notice, and call us on 0203 026 0636 to talk through what can be done.

Start the conversation early

The single most useful thing you can do is request a quote as soon as the show is booked, even before artwork is ready. That lets us confirm timings for your items and plan around your date.

Questions

How far ahead should I order exhibition graphics?

It depends on the items, quantities and finishing. Tell us your show date as early as possible and we will confirm timings for your job.

Can you deliver straight to the venue?

We deliver across the UK and worldwide. Tell us the venue and its delivery arrangements and we will confirm what we can do.

Can you print new graphics for stands I already own?

Yes. Give us the make and model or the graphic sizes, and we will print replacement graphics to fit.

Do you design and build complete stands?

Yes. We design and construct modular and custom stands, as well as printing graphics for existing ones.

Request a quote · Send artwork · 0203 026 0636

Tell us what you need printed

Give us the size, the material and the date you need it. We will check your files and send a quote.

0203 026 0636
London80 Willow Walk, Unit 1, London SE1 5SY
0203 026 0636   sales@superchrome.com