
A banner is only as good as the way it is hung. The same print can look crisp and taut on one wall, and baggy, creased and flapping on another, depending on the fixings. Before you order, think about what you are fixing to, and tell us. We can then finish the banner to suit.
Hems: the foundation
Most PVC and mesh banners are hemmed: the edge is folded back and welded or stitched. A hem reinforces the edge so fixings do not tear out, and gives a neat finish. Keep text and logos clear of the hem area when you design. Our guide to artwork set-up explains safe areas.
Eyelets
Eyelets are metal rings punched through the hem. They are the most common banner fixing because they work with almost anything: cable ties, bungee cords, rope, hooks or screws.
- Corner eyelets alone are fine for small banners in sheltered spots.
- For larger banners, eyelets are spaced evenly along the edges so the load is shared and the banner stays flat.
- For exposed sites, closer spacing and stronger hems spread the wind load.
Tell us how you plan to fix the banner and we will space the eyelets to suit.
Cable ties and bungees
Cable ties are quick, cheap and hold tight. They are ideal on railings, fences and scaffold, especially for short-term use. Cut them off to remove the banner.
Bungee cords or ball bungees keep a banner under tension and allow a little movement in the wind, which reduces strain on the eyelets. They are a good choice for banners inside a frame or between posts, and for anything that will stay up for a while outdoors.

Pole pockets
A pole pocket is a sleeve sewn or welded along the top, and sometimes bottom, of a banner. A pole, tube or batten slides through it. Pole pockets give a clean edge with no visible fixings and are used for lamp-post banners, hanging banners inside venues, and banners that drop from a beam. A pole along the bottom weights the banner so it hangs straight.
Hanging bars and drop systems
Hanging bars clamp or fix to the top and bottom of a banner, with a cord or hook for suspension. They are the tidy option for interiors: atriums, galleries, stages and the inside of venues. Drop systems let a banner be raised and lowered from a high point. These, along with hems and eyelets, are available on any banner we make.
Tension frames
For a banner that needs to look like a flat, permanent panel, it can be fitted into a frame and tensioned on all sides with bungees, or with a fabric edge that tucks into a channel. Frames hide the fixings and keep the surface drum-tight. They suit long-term outdoor signs and premium interior backdrops.
Other options
- Velcro and magnetic tape for attaching lighter banners and graphics to panels and exhibition walls.
- Flag and fabric banners can be finished with sleeves for flagpoles or with sewn loops.
- Scaffold and building wraps use mesh with reinforced edges, tied to the structure at close intervals. See building wraps.
Wind is the main enemy
Outdoors, most banner failures are wind-related. A solid PVC banner on an open fence or high wall catches a lot of wind. Choices that help:
- Use mesh instead of PVC on exposed sites.
- Fix along every edge, not just the corners.
- Use bungees, which give a little, rather than rigid fixings alone.
- Check fixings regularly on long-term installations.
For more on materials, see PVC vs mesh vs fabric.
Safety and permissions
Working at height needs the right equipment and people. If you are hanging a banner on a building, a public highway or a venue, check with the owner, the venue or the local authority what is permitted. Large banners on buildings should be fixed by people who do this regularly.
We can install it for you
We can handle the whole job: artwork, printing, finishing, installation and removal. We printed the entrance and interior banners for the Royal Albert Hall. When you ask for a quote, tell us where the banner will hang and what it fixes to.
If your artwork is ready, send it with a note of the fixing method so we can check text sits clear of hems, pockets and eyelets, then request a quote.
Questions
How many eyelets does my banner need?
It depends on the size, the site and how you fix it. Small sheltered banners may only need corner eyelets; larger or exposed banners need eyelets along every edge. Tell us where it will hang and we will space them to suit.
What is the difference between eyelets and pole pockets?
Eyelets are metal rings in the hem for ties, bungees or hooks. Pole pockets are sleeves that a pole slides through, giving a clean edge with no visible fixings.
Can you install my banner?
Yes. Our own team can install and remove banners. Tell us the site and what the banner fixes to when you ask for a quote.
My banner keeps tearing in the wind. What should I do?
Consider mesh, which lets wind through, fix along every edge rather than just the corners, and use bungees to allow some movement.
Request a quote · Send artwork · 0203 026 0636