Guides ·

Roller banner sizes explained

Roller banners come in widths from 600mm to 1500mm. How to pick a width for your space, and why you should check the visible area before you design.

Roller banner sizes explained

A roller banner, also called a roll-up or pull-up banner, is a printed graphic that retracts into an aluminium base. You pull it up, hook it to a pole, and it stands on its own. They are the most common piece of portable display kit at trade shows, receptions, conferences and in-store promotions, and they are often the first thing people order for an event.

The question we are asked most is simply: what size should it be? This guide explains how the sizing works and what to check before you design.

Widths: 600mm to 1500mm

Our stands come in widths from 600mm to 1500mm, single or double sided. The width you choose depends on the space and the job the banner has to do.

  • Narrower stands suit reception desks, corridors, shop counters and tight spaces where you need a branded presence without blocking a walkway. They are also the easiest to carry.
  • Mid-width stands are the general-purpose option for exhibition stands and events, with room for a logo, a headline, an image and contact details.
  • Wider stands work as a backdrop, behind a speaker, a photo point or the back of a small stand. Two or three placed side by side can form a continuous wall if the artwork is designed to line up.

We also supply counter-top and table-top stands for desks, pole stands without a recoil mechanism, and outdoor stands. Tell us where the banner will stand and we will suggest a type and width.

Height and the visible area

Height varies with the stand model, and some stands have an adjustable pole. More importantly, the printed graphic is always a little larger than the part people actually see. The bottom of the graphic is fixed into the base, where some of it stays hidden inside the cassette, and the top is held in a rail. Part of the print is therefore never visible.

That is why you should not design to a guessed size. Before you start, ask us for the exact graphic size and the visible area for the stand you are ordering, or for the stand you already own. We will tell you how much is hidden at the top and bottom so you can keep your logo and text clear of it.

Tall retractable banner stand with a printed graphic of a man in sunglasses and a list of services
Keep the key message in the upper and middle part of the graphic, clear of the base.

Designing for a roller banner

A roller banner is tall and narrow, and it is usually seen from a few metres away by people walking past. A few principles help:

  • Put the main message near eye level. The bottom third of a banner is often hidden behind a table, a brochure rack or people. Keep it for background, a web address or nothing at all.
  • Logo at the top. It is the part visible over a crowd and from the far side of a hall.
  • Fewer words. A headline and three or four short points read better than a paragraph.
  • Allow for the edges. Leave a margin down both sides as well as top and bottom.
  • Several banners in a row. If they will stand side by side, decide whether each one should work on its own or whether they form one image. A continuous image needs careful alignment and the gaps between stands taken into account.

For general file preparation, including bleed, colour mode and fonts, see how to set up artwork for large format print. If you would like it done for you, our designers can lay out or resize artwork to fit the stand.

Single or double sided

A double-sided stand carries a graphic on each face, so it can stand in the middle of a space or by a door where people approach from both directions. A single-sided stand is designed to stand against a wall or at the back of a stand.

Material and build

Our roller banner graphics are printed at high resolution on Opaljet, a hard-wearing opaque material, so lights and backgrounds do not show through. The stands are tough aluminium and high-quality plastic, and each one comes in a nylon travel bag.

Replacing a graphic

If your stand is in good condition but the message is out of date, we can print a replacement graphic for it. Tell us the make and the width when you ask for a quote, and we will confirm the graphic size for that model.

When a roller banner is not enough

If you need a full wall of print behind a stand, a pop-up display or a printed backdrop covers a larger area in one piece. Many exhibitors use one or two roller banners alongside a pop-up to bring the message forward to the aisle.

Ordering

To order, request a quote with the width, single or double sided, and quantity. Once we have confirmed the graphic size for your stand, send your artwork and we will check it fits before printing.

Questions

What widths do your roller banners come in?

Our stands come in widths from 600mm to 1500mm, single or double sided.

What size should my artwork be?

It depends on the stand model, because part of the graphic is hidden in the base and top rail. Ask us for the graphic size and visible area for your stand before you design.

Can you print a new graphic for my existing stand?

Yes. Tell us the make and width of the stand when you ask for a quote and we will confirm the size needed.

Do you have stands for outdoor use?

Yes, outdoor stands are available alongside roll-up, pole and table-top stands. Tell us where it will be used and we will suggest one.

Request a quote · Send artwork · 0203 026 0636

Tell us what you need printed

Give us the size, the material and the date you need it. We will check your files and send a quote.

0203 026 0636
London80 Willow Walk, Unit 1, London SE1 5SY
0203 026 0636   sales@superchrome.com